Electrically Telescopic Retractable Seating System , Movable Stadium Seating For Sport Center

Electric Telescopic Modular Grandstands / Retractable Seating for Sport Center

Specification

Description

1) Seat Modules: 460mm long assembled, blow modled, high density polyethylene modlues in mono tone colors provided with a scuff resistant textured.

2) Seat surface: 305mm width

3) Number Plates: Seat modules shall have recessed pockets to accept seat number plates.

4) End Caps: Each end of row shall be enclosed with metal end cap. Each caps shall be designed flush with screw fixing row letters optional.

Understructure Introduction

A.Frame System:

1) Wheels: Wheels with non-marking poly urethane face to protect wood and synthetic floor surfaces, with molded-in metal bush and bearing to fit a10mm diameter axles secured with C Clips.

2) Slant Columns: Tubular Shape Steel (RHS).

3) Deck Stabilizer: Steel components bolted to nose and riser at three locations per section. Interlocks with adjacent stabilizer on upper tier using low-friction nylon roller to prevent separation and misalignment.

4) Deck Support: Securely captures decking for entire length of section.

B.Deck System:

1) Section Lengths: Each bank shall contain sections not to exceed 5980mm in length with a minimum of two supporting frames per row, each section.

2) Rear Riser: Continuous roll formed steel members

3) Nosing: Continuous Tubular Steel Section (RHS)

4) Deck End Overhang: Not to exceed frame support by more than 1715mm

Application

Multi- purpose facilities

Schools

Colleges

University

Sports venues