Burgeon Sports Facilities Co., Limited
We will never provide quality and service discount product to our partners.
Add to Cart
Flexible Telescopic Modular Grandstands with Customized Seat Color
Description
1) Seat Modules: 460mm minimum spacing, below-molded, high density polyethylene modules in mono tone colors provided with a scuff resistant textured.
2) Comfort Profile: The Seat and the back have been designed with anatomically contoured seat surface using blow molded construction that allows form-fit deflection for maximum spectator comfort.
3) Melody Chair metal brackets are bolted to the plywood decks at the centre's detailed on the drawing. Bolts with Nyloc Nuts and washers are to be used.
4) Number Plates: Seat module shall have recessed pockets to accept seat number plates.
Quick Detail:
| Row Depth | 850 mm- 900 mm/Customized |
| C/C Width | 460mm-500mm |
| Row Riser height | 300mm-350 mm/Customized |
| Stair width | 920mm/1000mm/Customized |
| Seat centers | 460mm-500mm |
| Material of the frame |
Steel with powder coating decking: anti-slip plywood deck |
| Standard color |
under structure: black, grey, blue color or customized seat color: please refer to Burgeon color swatch |
| Operative method | Manual or Power Operation |
| Test Report | EN 13200-5 |
Understructure Introduction
A.Frame System:
1) Wheels: Wheels with non-marking poly urethane face to protect wood and synthetic floor surfaces, with molded-in metal bush and bearing to fit a10mm diameter axles secured with C Clips.
2) Slant Columns: Tubular Shape Steel (RHS).
3) Deck Stabilizer: Steel components bolted to nose and riser at three locations per section. Interlocks with adjacent stabilizer on upper tier using low-friction nylon roller to prevent separation and misalignment.
4) Deck Support: Securely captures decking for entire length of section.
B.Deck System:
1) Section Lengths: Each bank shall contain sections not to exceed 5980mm in length with a minimum of two supporting frames per row, each section.
2) Rear Riser: Continuous roll formed steel members
3) Nosing: Continuous Tubular Steel Section (RHS)
4) Deck End Overhang: Not to exceed frame support by more than 1715mm.
a
Features
1) starting with an economical nose mounting seat with a folding back and also can be installed with a folding mechanism and tip-up base
2) Integrated ergonomically designed for superior comfort
3) Its simplicity within its design allows for greater flexibility
4) Blow moulded construction for greater strength and confort